The extruded EPDM profile features a circular outer contour with a continuous hollow center, forming a tubular cross-section along the entire profile length. This construction distinguishes it from solid rubber cords, as the central bore creates an internal deformation space while reducing the amount of rubber material in the cross-section.
The cross-sectional geometry is primarily defined by three dimensions: outer diameter, inner diameter, and wall thickness. Wall thickness determines the amount of rubber surrounding the central cavity, while the relationship between the inner and outer diameters affects the profile's overall geometry and deformation characteristics. Consistent wall distribution is important for maintaining a uniform circular section without localized thin or thick areas.
During extrusion, the die opening controls the external contour and internal bore geometry. For hollow EPDM profiles, the positioning and stability of the internal forming section are particularly important to prevent bore displacement, uneven wall thickness, or cross-sectional distortion.

Compression Deformation & Elastic Recovery
Radial Compression Response
The circular hollow section deforms radially when compressed between contacting surfaces. The central cavity provides space for inward wall displacement, allowing the profile to accommodate changes in the available installation gap.
Wall Thickness & Compression Force
Wall thickness affects the resistance of the profile to compression. Thicker walls generally provide greater structural support, while thinner walls allow more deformation under comparable loading conditions. The required compression force should be evaluated against the actual profile dimensions and hardness.
Elastic Recovery After Compression
Following the removal of external pressure, the EPDM wall recovers toward its original cross-sectional shape. The degree of recovery depends on the compound formulation, compression level, loading duration, and operating temperature.
Compression Set Evaluation
For applications involving continuous or repeated compression, compression set testing helps assess permanent deformation after a specified loading period. This measurement can be used to evaluate whether the hollow profile retains sufficient dimensional recovery for its intended service conditions.
EPDM Material Properties & Weather Resistance
Chaoyue uses EPDM rubber compounds for extruded hollow profiles where resistance to outdoor exposure and moisture is required. Material selection focuses on the following properties to match the product's operating environment:
- Ozone & UV Resistance
EPDM provides resistance to ozone cracking and ultraviolet exposure. This property is relevant for hollow rubber profiles installed in outdoor assemblies where prolonged exposure to sunlight and atmospheric conditions may affect surface integrity.
- Water & Moisture Resistance
The EPDM compound is suitable for applications involving contact with rainwater, humidity, and many aqueous environments. Material specifications can be selected according to the expected exposure conditions and operating requirements.
- Hardness & Mechanical Properties
EPDM hardness, tensile strength, and elongation influence the physical behavior of the extruded profile. Chaoyue can evaluate compound specifications according to the required Shore A hardness and dimensional design of the hollow section.
- Chemical Compatibility
EPDM is not suitable for every chemical environment. Its compatibility with oils, fuels, solvents, and cleaning agents must be assessed according to the specific chemical composition, concentration, temperature, and exposure duration before material selection.
FAQ
What information should I provide when requesting a quotation for EPDM extruded profiles?
Buyers can provide a technical drawing, physical sample, estimated order quantity, and required material specifications. If available, include the application environment, dimensional tolerances, and expected annual demand. These details help Chaoyue assess tooling requirements and prepare a more accurate quotation.
Can you develop a new extrusion profile based on a physical sample?
Yes. Chaoyue can evaluate customer-provided samples for profile reproduction. The sample is used to assess the cross-sectional geometry, dimensions, and material characteristics before determining the extrusion tooling and production specifications.
Is custom extrusion tooling required for non-standard profile designs?
Custom tooling is generally required when the requested cross-section does not match existing extrusion dies. Tooling design is determined by the profile geometry, including its overall contour and internal cavity. Tooling costs and development arrangements can be evaluated after reviewing the technical drawing.
Can EPDM extruded profiles be supplied in continuous rolls or cut pieces?
Supply formats depend on the profile dimensions, flexibility, and packaging requirements. Continuous lengths and specified cut pieces can be discussed during order confirmation. Buyers should indicate the required delivery format and length tolerance when submitting an inquiry.

